Olivetti DP, Техническое руководство

Страница: 24 / 180

Setting a SUBNET MASK at the Control Panel
2-8
❖
DP Technical Information Guide
Setting a SUBNET
MASK at the
Control Panel
If your printer is connected to a WAN (Wide Area Network) you
may restrict user access by setting a Subnet Mask.
1
Press Menu Up or Menu Down until you see:
M e n u s
E t h e r n e t M e n u
2 Press Item Up or Item Down until you see:
E t h e r n e t M e n u
S u b n e t M a s k
3
Press Value Up or Value Down. You will see:
S u b n e t M a s k =
x x x . x x x . x x x . x x x
4 Press Value Up or Value Down to change the value of the character
above the cursor. The value is incremented or decremented by 1
each time the key is pressed. Holding down Value Up or Value
Down causes continuous scrolling through the values.
5 To change other characters in the Subnet Mask, press Item Up or
Item Down to scroll right or left respectively through the character
string, then press Value Up or Value Down to change the value of
the character above the cursor (as in Step 4).
6
When you have completed setting the IP address, press Enter. You
will see:
E t h e r n e t M e n u
S u b n e t M a s k
7
Press On Line. You will see:
R e a d y