Olivetti DP, Техническое руководство

Страница: 34 / 180

NetWare 3.1X Print Server Setup with Setup Wizard
3-4
❖
DP Technical Information Guide
NetWare 3.1X
Print Server Setup
with Setup Wizard
The DP printer defaults will, in most cases, enable connection to
Novell NetWare without adjustment.
1
Review the Configuration Sheet and VERIFY the following
settings:
• Ethernet or Token Ring is enabled.
• Frame Type matches the frame type of the desired fileserver.
• PDL is set to your desired PDL (PostScript or PCL 5e) or to
Auto. You may wish to set PDL to the desired type if only one
PDL will be used.
• Select desired Novell mode: NDS/BEM, NDS or BEM
• Print Server Name.
2 Start the CentreWare DP application from your workstation. For
more detailed information about the operation of CentreWare DP,
refer to Chapter 8: CentreWare DP 1.1 Software Instructions.
3 Click your mouse once on the Setup Wizard button or open the
Printer menu and select Setup Wizard.
4 When the Setup Wizard Welcome Screen appears, click Next >.
5 When the Select NetWare Server dialog box appears, click once on
Install this device on a Bindery Server.
6 Select a server from the drop-down list. Click Next >.
7
If prompted, enter a user name and password for the desired server
and click Login.
8
The Name the Device dialog will appear. You may enter a new
name for the printer you have selected, or keep the default name.
Click Next >.
9 When the Select Queue dialog appears, you may select an existing
queue, or create a new queue. To create a new queue, click the
Create Queue button and enter a new queue name, then click Create
Queue again. Once you have either selected a queue or created a
new one, click Next >.
10 The Confirm Choices dialog will appear and display the Printer
Name and name of Queue information you have supplied. Click
Finish. The Wizard will pop up a configuration progress box.