Olivetti DP, Техническое руководство, Страница: 65 / 180

Windows NT 3.51 Network
Chapter 4: Windows Peer-to-Peer Network Setup
❖
4-15
26
This will cause NT to scan your network for available AppleTalk
print devices.
27
Click once on OK to pick the DP printer as the desired AppleTalk
printing device.
Normally you should see multiple AppleTalk zones in the
AppleTalk Printing Devices window. If you do not, this
could mean that there are no AppleTalk routers on your
network. If this is the case, then zones will NOT display in
the AppleTalk Printing Devices window.
28 Click once to select the DP device from the list of available
AppleTalk print devices.
29 A dialog box appears and allows you to decide if you would like to
capture the AppleTalk Printing device.
30 Click YES if you wish all AppleTalk printing to go through this
queue.
31 Click NO if you wish all AppleTalk clients to print directly to the
printer.
32 You will be returned to the Create Printer window.
33
If you wish to share the printer with other users on the network,
click once on the check box for Share this printer on the network. If
not, go to the next step.
34 Select OK to close this window and click OK again to exit Create
Printer window.
35 You can now print to the DP printer. If you shared it, your NT
clients can now print as well.
36 Send a print job to the printer.
37
Check the print job for print quality. If print quality problems exist,
use Chapter 6 of the DP System Administrator Guide to correct the
problem.
38 If your print job did not print, see the Troubleshooting section for
your operating system in this chapter to correct the problem.