Olivetti DP, Техническое руководство

Страница: 77 / 180

Windows Troubleshooting
Chapter 4: Windows Peer-to-Peer Network Setup
❖
4-27
Windows NT 3.5X
Troubleshooting (TCP/
IP Protocol)
This troubleshooting section assumes:
• You have verified the operation of the printer using the
procedures found in Chapter 2: Connecting to Your Network.
• You have loaded a DP PCL or PostScript print driver.
• You have printed and retained a current copy of the
Configuration Sheet.
1
Verify these items in the Ethernet Menu area of the Configuration
Sheet:
• IP Address Resolution: is set to DHCP, Control Panel, or RARP/
BOOTP (depending on your network configuration).
• Current IP Address: is set correctly (note this address if it is
assigned dynamically).
• Subnet Mask: is set correctly (if used).
• Default Gateway: is set correctly (if used).
Check the LPR and AppSocket settings and verify they are set as
desired. These settings are not critical to operation but provide
some security and usability features.
2 Verify the PDL in the Ethernet Menu area of the Configuration
Sheet.
• Interpreters: PCL or PostScript (depending on your driver).
3 From the server open the Control Panel and double-click the
Network icon.
4 Verify that “Microsoft TCP/IP Printing” is loaded.
5
If this software is not present, install it using the documentation
provided by Microsoft. Then return to this document.
6
From your desktop, open the Main Group.
7 Double-click the Control Panel icon.
8 Double-click Printers icon.
9
Print Manager Executes.
10
In the Print Manager window, select the printer that you created
when you installed the printer driver.