Olivetti DP, Техническое руководство

Страница: 67 / 180

Windows NT 4.0 Network
Chapter 4: Windows Peer-to-Peer Network Setup
❖
4-17
12
This will open up the Add LPR compatible printer window. Type in
the IP address of the DP printer and raw, passthru or ps for the
printer name and select OK. Note that the printer name is case
sensitive.
13
The Wizard will return you to the previous dialog. Verify that the
new IP address you entered is in the list and correct. The check box
to the left of the address must be checked. If it is not, check it then
select Next>.
14 Insert the DP CD, and click Have Disk.
15
Click the Browse button and select the directory containing the
Windows NT drivers.
16
Select the appropriate .INF file, then click Open.
17
When the Wizard returns you to the previous dialog, verify that the
path and file name are correct, and click OK.
18
At the next dialog, enter a name for the printer and select whether
you want that printer to be the default, then click Next>.
19
If the printer will not be shared, click Next>. To share the printer,
enter a Share Name, check the share check box, then click Next>.
20
At the next dialog it is recommended that you print a test page.
Click Finish.
21
Wait for the Test Print to print. When a new dialog asks for
confirmation of the test print, click Yes.
22
Send a print job to the printer.
23 Check the print job for print quality. If print quality problems exist,
use Chapter 6 of the DP System Administrator Guide to correct the
problem.
24
If your print job did not print, see the Troubleshooting section for
your operating system in this chapter to correct the problem.
With printers connected to a Windows NT network, with
TCP/IP protocol enabled, you can use a Web Browser to
monitor and configure your printer. Refer to
Chapter 9: Internet Printer Services for further
information.