Okofen PE 08, Руководство по эксплуатации

Страница: 94 / 170

94 Screed programme
113 3..7 7..11 S Sc crre ee ed d p prro og grra am mm me e
The screed programme may be operated up to 31 days.
A desired flow temperature must be adjusted for each individual day. These temperatures are constant and
not dependent on outside temperature or room thermostat settings. The function is switched off automati-
cally at the end of the programme and the heating circuit reverts to the previous operating mode.
D Da am ma ag ge ess tto o tth he e ssc crre ee ed d b by y tto oo o h hiig gh h tte em mp pe erra attu urre ess..
Only use this programme in conjunction with a pump in-
terlock switch positioned on the flow from pump
to under floor central heating – this must be set to the
max. safe temperature for the conditions of the floor.
No libility is accepted by the Pelletronic supplier for da-
mage to floors or sub floors.
Continuous power supply is required to the controller to
maintain the settings for this programme.
Only use programme temperatures approved by the
UFCH and flooring suppliers.
Screed programme is in the menu Heating circuit.
Switch on the Screed programme. At the end of
the screed programme the screed programme
switches off itself automatically and returns to
the previous mode.
Enter the number of heating days. There are 0-
31 heating days possible. According to the num-
ber of heating days a Flow temperature set ap-
pears for every heating day.
Select every single day and adjust the Flow tem-
perature set. The pre-set Flow temperature set
per day is 20 °C.
With you get to all other days.
13.8 Solar Heating
This function should allow a more efficient use of
solar energy (AC energy). Each heating circuit
receives a new button.
Note:
The menu Solar Heating is only available if a
accumulator is allocated.
PE 567 EN 1.1