Oki MB760, Руководство по обслуживанию

Страница: 341 / 390

45641001TH Rev.1
11-43 /
Oki Data CONFIDENTIAL
05/
08
Mode Element
Sub
element
Item Subitem Code Sub-
code
Details
Default
value
Acceptable
value
RAM Contents
Proce-
dure
08 Setting
Mode System User
interface 8745 Enable/Disable
setting of EWB
history
0 0-1 SYS Sets whether part of the cookie, password, and form data
of user who logs in to EWB is saved or not.
0: Disabled
1: Enabled
1
08 Setting
Mode System Network 8746 Port number
setting of
destination 10 for
sending trap 162 1-65535 NIC Sets the port number of destination 10 for sending SNMP
trap. If the port is used when using the real time log
notification function, change the port number.
12
08 Setting
Mode System User
interface 8748 Input of
department code at
user authentication 0 0-1 SYS 0: Not required
1: Required 1
08 Setting
Mode System Network 8749 User authentication
by logon
information to
domain (external
authentication) 0 0-1 SYS 0: Disabled
1: Enabled
1
08 Setting
Mode System General 8750 Time to wait for
print image 0 0-1 SYS Sets whether the drum idling is executed or not when the
waiting for print image occurred. If there is the stain on
the back side of the paper, set the value of this code to
“1”. When the value is set to “1”, the number of times the
equipment stops printing may increase.
0: Waiting is enabled (8 sec.)
1: Waiting is disabled (0 sec.)
1
08 Setting
Mode System Maintenance Notification of
remaining amount
of toner
8755 Enable/Disable
setting 0 0-1 SYS 0: Disabled
1: Enabled
1
08 Setting
Mode System Maintenance Notification of
remaining amount
of toner
8756 0 Remaining amount
at first notification 25 0-100 SYS 0 to 100% 4
08 Setting
Mode System Maintenance Notification of
remaining amount
of toner
8756 1 Notification interval 10 1-25 SYS 1 to 25% 4
08 Setting
Mode System User
interface Card reading
device 8758 Overwriting of login
at authentication 0 0-1 SYS Switches the enable/disable setting for the function to
overwrite the login information at the card authentication.
0: Disabled
1: Enabled
1
08 Setting
Mode System General 8761 Retention of print
(spooling) data 0 0-1 SYS Use this code to retain and obtain the print data (spooling
data) if problem occurs. After obtaining the data, be sure
to disable the setting.
0: Disabled (print data is deleted)
1: Enabled (print data is retained)
1
08 Setting
Mode System Maintenance Display of
remaining life (for
RDMS/MMDT)
Toner 8762 0 K 0 0-100 SYS 0 ~ 100%. The small value indicates that the remaining
life is short.
14