NSK MEGATHRUST ESA-LYB2T15-21, Руководство пользователя

Страница: 158 / 234

— 12-3 —
12.2. Command and Parameter
l
“Shipping set” denotes a value which is set at the factory before shipment.
l
“Default” denotes a value which is adopted by entering a command and parameter with no data.
l
The password must be entered before inputting a command marked with
«
. Refer to “9.3.2.3.
Password” for more details.
«
« «
«
AB : I/O polarity
Format : AB n1 n2 n3 n4 n5 n6 n7 n8
Data : nn=0 A contact (Normally open)
nn=1 B contact (Normally closed)
nn=X
à
At the time of input:
The port set to X does not change polarity.
à
At the time of read-out:
For the port which is shown as “X” the polarity can not
be change. (A contact is fixed.)
Shipping set : ABX0X0XX00 (all A contacts)
Default : Not omissible (input all 8 digits)
l
Set the polarity of input command port.
l
The ports of which the polarity can be changed are EMST, HLS, OTP and OTM. The other ports
are fixed to A contact.
l
Set “X” for the port of which polarity can not be changed. If “0” or “1” is input, the display
shows “?” indicating the fault input.
l
If the parameter “TY” is changed, all polarity settings return to the shipping set (all A contacts).
l
Polarity setting can be read by “TS” or “?AB” command.
l
The table below shows the data and port.
Data digit n1 n2 n3 n4 n5 n6 n7 n8
CN2 pin No. 25 12 24 11 23 10 22 9
TY1
SVON EMST RUN HLS PRG3 PRG2 PRG1 PRG0
TY2
SVON EMST RUN HLS PRG3 PRG2 DIR JOG
TY3
SVON EMST RUN HLS PRG3 PRG2 OTM OTP
TY4 SVON EMST RUN HLS HOS CLR OTM OTP
TY7 SVON EMST RUN HLS DIR JOG OTM OTP
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com