Novation Ultranova Скачать руководство пользователя страница 30

Страница: 30 / 135

RE5: Pan Depth

Displayed as:

PanDepth

Initial value:

Range of adjustment:

0 to 127

This control determines the amount of image shift applied by the auto-panner. At its
maximum value of 127, the auto-panner will pan the sound both fully left and fully right;
lower values will pan less extremely, with the sound remaining more centrally located. The
auto-panner is effectively off when the parameter value is zero (but the manual pan control

RE2

is still operative).

RE6 to RE8:

Not used.

FX Menu Page 2 – Routing

This menu page is where you assign the effects you need. You can also specify their con-
iguration – whether they are “connected” serially, with the output of one feeding the input
of another, or are in parallel, where the synth sound is fed to the inputs of more than one FX
device simultaneously, the device outputs then being mixed together.

RE1: FX Slot routing

Displayed as:

Routing

Initial value:

1 (2+3+4+5)

Range of adjustment:

see diagrams below

This parameter lets you conigure the interconnection of the FX slots. The ive slots may be
interconnected in serial, in parallel, or in various combinations of serial and parallel.

The FX types can be categorised in various ways: some are time-based (chorus,
delay), others are static (EQ, distortion). Some should be used as an FX send/
return loop (implying a parallel connection), others as an insert (implying a serial

connection). Depending on the synth sound itself and the actual effects being used, some
conigurations will clearly work better than others. When using multiple effects, try a few
different interconnections to see which works best.

RE2: Not used.

RE3 to RE7: Slot Effect Selection

Displayed as:

SlotnFX

(where n=1 to 5)

Initial value:

Bypass

Range of adjustment:

see table at page 44

Each of the ive slots may be loaded with one of the available FX processors. Use the rotary
encoder for any slot to select an effect from the list of those available. The table shows the
“pool” of FX devices available. As DSP capacity is inite, each device in the list may only be
loaded into one slot, and once it has been loaded, it will no longer appear in the list of avail-
able processors for the other slots. You will see that multiples of most of the FX devices are
provided, to allow the most creative use of the FX.

RE8:

Not used.

FX Menu Page 3 – FX Level controls

RE1: Effect feedback
Displayed as:

FXFedbck

Initial value:

Range of adjustment:

0 to 127

This parameter controls how much signal is fed back to the input of the effects chain from
its output. The FX Slot from which the feedback is derived varies with the FX Routing
coniguration in use – see diagram. However, with all routing conigurations, the feedback
is added back into the chain at FX Slot 1. Note that not all conigurations employ feedback.

RE2

Not used.

MIXER

O1Level

O2Level

O3Level

RM1*3Lvl

RM2*3Lvl

NoiseLvl

PreFXLvl

PstFXLvl

127