![background image](http://html1.mh-extra.com/html/nikon/eclipse-ma200/eclipse-ma200_instructions-manual_1691843007.webp)
Safety Precautions
5
CAUTION
1. Handle
with
care
This product is a precision optical instrument. Handle the microscope system with care to avoid shock on
impact. In particular, objectives may loose accuracy when exposed to even a weak physical shock.
2. Do not wet the microscope
If the product gets wet, a short circuit may cause malfunction or abnormal heating of the microscope. If you
accidentally spill water on the microscope, immediately turn off the power switch (set the switch to the “
c
”
side) and unplug the power cord from the outlet. Then, wipe off the water with a piece of dry cloth. If water
enters a component, immediately suspend use of this product, disconnect the power cord from the outlet, and
contact your nearest Nikon representative.
3. Weak electromagnetic waves
The product emits weak electromagnetic waves. The accuracy of any precision electronic equipment may be
adversely affected if positioned too close. To prevent bad influences, locate such electronic equipment away
from the microscope system. If a TV or radio reception is affected, move the TV or radio set farther from the
product.
4. Installation
location
This product is a precision optical instrument. The usage or storage in an inappropriate environment may
result in malfunctions or poor performance. Consider the following factors when selecting an installation
location:
•
Select an installation location with a temperature from 0 to +40°C and a relative humidity of 85% or less
(there should be no condensation).
Select a storage location with a temperature from -20 to +60°C and a relative humidity of 90% or less
(there should be no condensation).
If installed or stored in a location subject to high temperatures and humidity, mold or condensation may
form on the lens, resulting in lowered performance and possible damage to the microscope.
•
Avoid a brightly lit location, such as exposed to direct sunlight or directly under a room light. If there is
excessive ambient light, the image may not clearly be visible.
•
Always install the product with a surrounding clear area of 10 cm or more.
•
Install the product in a location free from considerable dust or dirt.
•
Install the product on a flat surface with little vibration.
•
Install the product on a sturdy desk or table for the base of the microscope system.
•
Select a layout that allows easy removal of the power cord from the AC inlet of the product in the event of
an emergency.
•
Do not install in a narrow space such as a shelf or locker.
•
Do not place anything on the product.
•
Cover the product to avoid dust when storing.
•
For details about the operating environment and storage environment, refer to “7. Specifications.”
5. Cautions on moving the microscope
•
This product is a precision optical instrument. Handle it carefully and do not subject it to a strong physical
shock. (In particular, objectives may loose accuracy when exposed to even a weak physical shock.)
•
Securely hold the microscope at the front bottom and rear bottom when carrying it.
Содержание ECLIPSE MA200
Страница 1: ...Inverted Metallurgical Microscope ECLIPSE MA200 Instructions M498E 08 10 NF 1 2 4 ...
Страница 2: ......