Chapter 7 Specifications
105
Power cord
When used in 100-120 V region, outside Japan:
UL listed detachable power cord set, 3 conductor grounding
(3 conductor grounding Type SVT, No.18 AWG, 3 m long maximum, rated at 125 VAC minimum)
When used in 220-240 V region:
Detachable power cord set approved according to EU/EN standard, 3 conductor grounding
(3 conductor grounding Type H05VV-F, 3 m long maximum, rated at 250 VAC minimum)
When used inside Japan:
PSE approved detachable power cord set, 3 conductor grounding
(3 conductor grounding Type VCTF 3x0.75mm
2
, 3 m long maximum, rated at 125 VAC minimum)
Operation
conditions
Temperature:
0°C to +40°C
Humidity:
85% RH maximum (with no condensation)
Altitude:
2000 m maximum
Pollution degree:
Degree 2
Installation category: Category II
Electric shock
protection class:
Class I
Indoor use only
Transport and
storage conditions
Temperature:
-20°C to +60°C
Relative humidity:
90% RH maximum (with no condensation)
Imaging system
Scale:
Slider slot provided
Port:
Eyepiece tube/Back = 100/0
Eyepiece tube/Back = 55/45
Intermediate magnification:
Intermediate magnification unit (MA2-MC) attaching part provided
Applicable
standard
•
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause harmful interference to radio
communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his own expense.
•
This Class A digital apparatus complies with Canadian ICES-003.
Cet appreil numérique de classe A est conforme à la norme NMB-003 du Canada.
•
The product complies with Australian EMI standard. (AS/NZS CISPR11 Group1 Class A)
•
CE
marking
•
The product meets EU Low Voltage Directive requirements.
•
The product meets EU EMC Directive requirements. (EN61326)
Содержание ECLIPSE MA200
Страница 1: ...Inverted Metallurgical Microscope ECLIPSE MA200 Instructions M498E 08 10 NF 1 2 4 ...
Страница 2: ......
