![background image](http://html1.mh-extra.com/html/nikon/eclipse-ma200/eclipse-ma200_instructions-manual_1691843048.webp)
Chapter 3 Operation Details
46
3.15
Using the DIC Slider (L-DIHC/L-DIC)
Figure 3.15-1 L-DIHC/L-DIC slider
Attach the L-DIHC/L-DIC DIC slider to the quintuple
nosepiece (MA2-NUI5 or LV-NU5A) in combination
with the MA2-PA polarizer/analyzer unit to perform
the DIC microscopy under the episcopic illumination
in single NR method.
The L-DIHC slider is designed for high contrast
observation.
3.15.1
Inserting/removing the DIC prism from the optical path
Figure 3.15-2 Inserting/removing the DIC prism
from the optical path
Push the slider attached to the revolving nosepiece.
When it hits the second click-stop position, the DIC
prism enters the optical path.
Pull out the DIC slider. When it hits the first click-stop
position, the DIC prism is removed from the optical
path.
3.15.2
Setting the DIC prism
Figure 3.15-3 DIC prism position indication
For the DIC microscopy, switch the DIC prism
depending on the objective to be used.
The industrial LU objective has a character (A or B)
showing the DIC prism position, which is indicated
next to the magnification/N.A. value on the objective
barrel. The figure shows the character “A” indicated
on the objective. Turn the prism setting dial to align
the index with the “A”.
Prism position index
Sliding limit groove
Second click-stop
position
First
click-stop
position
Prism position
Prism setting dial
DIC slider
Prism movement
knob
Содержание ECLIPSE MA200
Страница 1: ...Inverted Metallurgical Microscope ECLIPSE MA200 Instructions M498E 08 10 NF 1 2 4 ...
Страница 2: ......