![background image](http://html1.mh-extra.com/html/nikon/eclipse-ma200/eclipse-ma200_instructions-manual_1691843070.webp)
4
Assembly
68
WARNING
•
Before assembling the microscope, be sure to read the
WARNING and CAUTION at the
beginning of this instruction manual and follow the instructions written therein.
•
To prevent electrical shocks and fire, turn off the power switch (set the switch to the “
c
” side) and
unplug the power cord from the outlet when assembling the microscope.
CAUTION
•
Be careful not to pinch your fingers or hands during assembly.
•
Scratches or fingerprints on the lenses will adversely affect the microscopy image. Be careful not to
scratch or touch the lens surfaces. If lenses are contaminated with fingerprint or such, clean them
according to the procedure described in “6. Care and Maintenance.”
•
This product is a precision optical instrument. Handle it carefully and do not subject it to a strong
physical shock. In particular, objectives may loose accuracy when exposed to even a weak physical
shock.
■
Required tools
•
Two hexagonal screwdrivers (2 mm) (supplied with the microscope)
•
Hexagonal wrench (3 mm) (supplied with the microscope)
•
Hexagonal wrench (5 mm)
•
Filter replacing tool (supplied with the microscope)
When these tools are not used, place them in the tool holder at the right-end of the top-surface of the product.
■
Installation location
This product is a precision optical instrument. The usage or storage in an inappropriate environment may
result in malfunctions or poor performance. Consider the following factors when selecting an installation
location:
•
Avoid a brightly lit location, such as exposed to direct sunlight or directly under a room light. If there is
excessive ambient light, the image may not clearly visible.
•
Always install the microscope with a surrounding clear area of 10 cm or more.
•
Install the microscope in a location that is free from considerable dust or dirt.
•
Install the microscope on a flat surface with little vibration.
•
Install the microscope on a sturdy desk or table that is able to bear the weight of the instrument.
•
Do not install the microscope in a hot and humid location.
•
Arrange a layout that allows easy removal of the power cord from the inlet of the product in the event of an
emergency.
•
For details about the operating environment and storage environment, refer to “7. Specifications.”
Содержание ECLIPSE MA200
Страница 1: ...Inverted Metallurgical Microscope ECLIPSE MA200 Instructions M498E 08 10 NF 1 2 4 ...
Страница 2: ......