![background image](http://html1.mh-extra.com/html/nikon/eclipse-ma200/eclipse-ma200_instructions-manual_1691843016.webp)
2
Microscopy
14
This chapter describes the procedure of each microscopy.
See Table 2.1 for the items required for each microscopy.
•
Refer to “4. Assembly,” when the product has not been assembled yet.
•
For detailed information about operations of parts of the product, refer to “3. Operation Details.”
•
Notes on using an external light source:
The procedures described on the episcopic illumination in 2.1 to 2.5 are based on use of the light source of
the MA200 main body with the LV-LH50PC Lamphouse attached. When using an external light source to
perform the microscopy, follow the notes below.
•
The procedure on how to turn the power switch to ON: Turn on the power switch on the external device
in advance, then turn on the MA200 main body.
•
Setting the Internal/External brightness control changeover switch of the MA200 main body: Sets to ON
(external mode).
•
Adjusting the brightness of the light source: Adjusts the brightness on the external light source.
•
To perform the epi-fl microscopy using the C-HGFI/C-HGFIE HG Precentered Fiber Illuminator as the
external light source, screw the compensation filter supplied with the fiber adapter into the MA2-FL
fluorescent unit. (Refer to 4.15.1.)
Содержание ECLIPSE MA200
Страница 1: ...Inverted Metallurgical Microscope ECLIPSE MA200 Instructions M498E 08 10 NF 1 2 4 ...
Страница 2: ......