Nikon ECLIPSE MA200, Инструкция по эксплуатации

Страница: 39 / 107

Chapter 3 Operation Details
37
3.8 Placing the Sample and Operating the Stage
3.8.1 Placing the sample
Figure 3.8-1 Placing the sample
Normally, a sample can be placed on the stage with
the sample holder. It can be also placed directly on
the stage without the sample holder. In either case,
be sure that the observation position comes to the
center of the view-field.
■
Sample holder
To use the sample holder, place it onto the stage.
The MA2-SR rectangular stage is supplied with the sample holder (outer diameter:
φ
108 mm, thickness: 2 mm,
teardrop-shaped aperture:
φ
22 mm). This sample holder is also supplied with the sample clip to hold the
sample set on the stage. Use the clip to prevent the sample from tipping over or being moved.
The sample holder is supplied with a rotation knob. If you turn the ring holding the rotation knob, you can turn
the sample with the observation position unmoved.
Various options are available for the sample holder as shown below. Select an appropriate option according
to the size or observation method of the sample used.
Item Model Remarks
Sample holder Standard Holder
(attached to stage)
Outer diameter
φ
108 mm; thickness: 2 mm; teardrop-shaped
aperture:
φ
22 mm; supplied with the rotation knob and a sample
clip
MA-SRSH 40
φ
40 mm, supplied with the rotation knob and a sample clip
MA-SRSH 10
φ
10 mm, supplied with the rotation knob and a sample clip
MA-SRSH 25-40
φ
25×40 mm, supplied with the rotation knob and a sample clip
MA2-SRSH Holder set (
φ
23, 30, 36 mm) supplied with the rotation knob and
a sample clip
MA-SRSH1
φ
15 mm
Sample holder
Sample
Sample clip