Nidek Medical AFC-330, Руководство оператора

Страница: 87 / 186

71
OPERATING PROCEDURE : Photography Mode Other Than Normal Photography Mode
2
In this condition, the image capturing unit is aligned to the target position (about 1 mm
shifted from the center to the temporal side of the left eye), and focused to the fundus.
4) When the proper focus to the fundus is achieved with the auto focus, the message “Cap-
turing the image.” appears, then image capture is automatically executed with flash.
5
Check the captured image in the same manner as Step 7 (Page 62) in “2.3 Image Cap-
ture (Normal Photography Mode [Auto shot, No blink])”.
6
To save the captured image, press the OK/Auto transfer button . To not save the
captured image and perform image capture again, press the retry button .
The same action can be executed by rotating the joystick counterclockwise or clock-
wise , then pressing the release button.
1) When the OK/Auto transfer button is pressed, the captured image is saved in the
USB flash drive, and the review screen is displayed.
2) If the image is dark or too bright when performing image capture again, adjust the flash
intensity using the flash intensity up/down buttons.
7
When the anterior eye observation screen is displayed, perform the nasal image capture
in the same manner as the temporal image capture.
In the nasal image capture for the left eye, the electronic working dot (green) is displayed at
the position shifted about 1 mm from the center toward the nasal side, and the stereo gauge
(green) appears on the left side of the screen contrary to the temporal image capture.
8
To capture images of the other eye, pull the joystick toward the operator, then move the
image capturing unit horizontally toward the other eye to display the anterior eye obser-
vation screen, then capture images in the same procedure as the above.
9
To perform image capture for the next patient, press the next patient button to dis-
play the anterior eye observation screen, then perform the procedure from Step 1.
10
When image capture is complete, proceed to “2.4 Image Capture Shutdown Procedure”
(Page 67).
26
#DEF'(IJ
䎷䎨䎰䎳䎲䎵䎤䎯
Temporal button, Nasal button
(Button of the selected side is orange.)
Stereo gauge
• In Stereo photography mode, image capture is performed in the order of temporal and
nasal. So, the nasal image capture cannot be performed until the temporal image is saved.
The temporal image capture can be skipped by pressing the nasal button at the upper part
of the fundus observation screen.