Nidek Medical AFC-330, Руководство оператора

Страница: 43 / 186

27
BEFORE USE : Screen Configuration
1
3. Image capture button
When this button is pressed, the anterior eye observation screen appears in the same photography mode as
used for the latest image capture.
4. Recapture button
Used to display the anterior eye observation screen with the same image capture conditions as used for the
image being selected with the thumbnail (same eye [left eye if the selected image is left eye] in same
photography mode).
5. Thumbnail button
Used to display thumbnails of captured images.
6. Mode-specific thumbnail button
Used to display thumbnails of images captured in the same photography mode as used for the selected
image.
7. Side-by-side image button
Used to display the partner eye of the selected image side by side when there are both right and left eye
images captured in the same photography mode.
If either the right or left eye image has not been captured, this button is displayed in black and white and
disabled.
8. Right eye review button
Used to display right eye images captured in the same photography mode as used for the selected image.
When there is no right eye image, this button is displayed in black and white and disabled.
9. Left eye review button
Used to display left eye images captured in the same photography mode as used for the selected image.
When there is no left eye image, this button is displayed in black and white and disabled.
10. Transfer button
Used to transfer images of the selected thumbnail to the connected external storage device such as a USB
flash drive.
However, if the “Transfer to” setting is set to OFF in the External settings screen (see “
 Transfer” (Page
121) in 2.9.3), this button is black and white and disabled.
• If the selected image is for the left eye and the image capturing unit is positioned toward the
right eye when the recapture button is pressed, a message appears to instruct the operator
to switch the eye. In such a case, be sure to reposition the unit.
• The format of the data to be transferred to the specified destination can be selected
depending on the type of the storage device that is being connected. (see ”

Transfer”
(Page 121).)