Nidek Medical AFC-330, Руководство оператора

Страница: 50 / 186

34
BEFORE USE : Screen Configuration
2. Camera settings select buttons
A maximum of three image capture conditions can be preset and saved as “CAM1”, “CAM2”, and “CAM3” for
later use.
, , : Default is CAM1.
For setting of each button, see “  CAM1, CAM2, CAM3” (Page 117).
These buttons do not appear and cannot be used in Low-light photography mode.
3. Focus bar toggle button
Used to select whether to remove the focus bar on which to project the focus split from the fundus
observation screen.
: The focus bar is displayed in the fundus observation screen. (Default)
: The focus bar is removed from the fundus observation screen. The auto focus is disabled because
the focus split is not projected.
4. Operator register button
Displayed when the “Operator’s info entry” setting is set to “ON” in the “Main unit settings—Software
settings” screen of “Control menu”. (See “
 Software settings” (Page 108).)
The default setting is “OFF” and this button is not displayed.
When the operator’s ID is registered, the ID is added to the information to be printed.
To register an operator, press this button to display the screen for registering operators. Then press the blank ID
and input the operator’s ID using the keyboard in the screen.
5. Control menu button
Used to open the Control menu screen that allows various settings.
The appearance of this button is the same as the photography setting menu button.
6. USB flash drive button
Used to switch, connect, or disconnect the USB flash drive for the device, or to open the USB Flash Drive
Settings screen to check the presence or absence of image files saved in the USB flash drive.
For details, see “3.1.1 Connection, disconnection, and use of USB flash drive” (Page 140).
7. External device display
Shows external devices connected to the device as icons.
: Displayed when a USB flash drive is connected to the device.
This mark disappears when all USB flash drives are disconnected.
This mark does not appear even if any USB flash drive is connected to the device unless USB flash drive is not
specified as the image transfer destination (see “
 Transfer” (Page 121) in 2.9.3). Even in this case, the USB Flash
Drive Settings screen can be opened with the USB flash drive button.
: Displayed when a PC is connected to the device via a LAN.
This mark does not appear when the LAN is disconnected or PC is not specified as the image transfer destination
(see “
 Transfer” (Page 121) in 2.9.3).
䎦䎤䎰䎕 䎦䎤䎰䎖
䎲䎩䎩