Nidek Medical AFC-330, Руководство оператора

Страница: 11 / 186

IX
:
After use
CAUTION
• When the device is not in use, turn off power to the device and protect the objective
lens from dust by covering it with the lens cap, then place the dust cover over the
unit.
• When disconnecting the power plug from the power outlet, turn off power to the
device, then remove it making sure to always hold the power plug, not the cord.
The metal core of the cord may be damaged and electric shock, malfunction, or fire may
result.
• If the device will not be used for an extended period of time, disconnect the power
cord from the power outlet.
Failure to do so may leave the device vulnerable to electric disturbances which may
result in fire.
• Occasionally clean the prongs of the power plug with a dry cloth.
If dust settles between the prongs, the dust could collect moisture, and short circuit or
fire may occur.
• If the device is used after a long period of disuse, check for any abnormality before
use.
• Store and transport (when the device is packed) under the following conditions:
Ambient temperature during transport: -30 to 60ºC (-22 to 140ºF)
Ambient temperature during storage: -10 to 55ºC (14 to 131ºF)
Humidity: 10 to 95% (non-condensing)
Atmospheric pressure: 700 to 1,060 hPa
Protected from exposure to water
Minimal dust in the air
Protected from direct sunlight
• When transporting the device, set it to Packing mode and ready to be packed, and
store it in a specific packaging material without locking the main unit using the
locking knob.
The device may fail from excessively hard vibration or bumping.
For details of Packing mode, see “2.4.2 Finishing operation in order to transport the
device: Packing mode” (Page 68).
For details of the locking knob, see “5. Locking knob” (Page 7) in “1.4 Device Configura-
tion”.