Nidek Medical AFC-330, Руководство оператора

Страница: 71 / 186

55
OPERATING PROCEDURE : Image Capture Preparation
2
2.2 Image Capture Preparation
This is the daily preparation procedure for the device with a USB flash drive connected to it, which is
the default setting for the device.
When using the USB flash drive, observe the instructions in “3.1 Connection of USB devices” (Page
139).
When using the device in connection with the PC through a LAN, also see “3.2 Connection of PC”
(Page 144).
1
Connect the USB flash drive to the USB port.
Confirm that the USB flash drive is connected
securely to the USB port.
After starting the device, connection of the USB flash drive can be confirmed on the LCD
touch-screen. (See “3.1.1 Connection, disconnection, and use of USB flash drive” (Page
140).)
Power switch
USB port
CAUTION
• Each time before connecting a USB flash drive to the device, be sure to check it for
viruses.
If the device is infected with any viruses and any problem occurs, NIDEK does not
assume responsibility or compensate for damages.
• When connecting the USB flash drive to the device, be sure to perform the procedure
described in “3.1.1 Connection, disconnection, and use of USB flash drive” (Page
140), or with power to the device turned off.
Failure to do so may corrupt the data in the USB flash drive or cause the device to mal-
function.
• When restarting the device, turn on power to it at least three seconds after turning
power off.
If the power switch is turned on immediately after turning it off, the device may malfunc-
tion.