Nidek Medical AFC-330, Руководство оператора

Страница: 25 / 186

9
BEFORE USE : Device Configuration
1
[Power switch and ports]
1. Power switch
Press the On ( ) side to turn on power to the device.
When turning off power to the device, be sure to press the shutdown button at the top left of the LCD touch-
screen, then wait for the instruction to turn off the power switch to appear before turning off the power switch.
2. Power inlet
Connect the removable power cord.
3. VGA port
Not used. Do not connect any device.
4. Keyboard port , mouse port
Not used. Do not connect any device.
5. USB port
The two USB ports (USB 2.0 supported) are used to connect USB devices such as a USB flash drive or an
external color printer. Do not connect any other devices.
Captured images can be transferred to the USB flash drive, or printed using the printer.
When a USB device is connected to the USB connector for the first time, the driver needs to be registered in Driver
install mode. For details, see “3.1 Connection of USB devices” (Page 139).
For precautions in the connection, see “During Use” (Page V), “2.2 Image Capture Preparation” (Page 55), and “3
OPERATION FOR WHEN PERIPHERAL DEVICES ARE CONNECTED” (Page 139).
6. LAN port
Used to connect to an Ethernet network.
To connect to an Ethernet network, LAN needs to be set up in the menu screen that appears by pressing the
photography setting menu button
.
The device is connected to an Ethernet network by service personnel of NIDEK or your authorized distributor after
obtaining permission from the network administrator of the facility.
Before connecting cables, be sure to turn off power to the connected units. (See “During Use” (Page V),
“Connection to Network” (Page XI), and “3 OPERATION FOR WHEN PERIPHERAL DEVICES ARE CONNECTED”
(Page 139).)
3. VGA port
4. Keyboard and mouse ports
5. USB port
6. LAN port
1. Power switch
2. Power inlet