1084 EQ
The 1084 EQ screen is only available if you have at least
one of the 1084 EQ cassettes fitted.
The large green display to the right of the screen indicates which channel
number the EQ screen relates to.
The EQ screen is displayed by pressing the channel SEL button, or
pressing the
EQ
just beneath the small TFT screen on the monitor panel.
Once the EQ screen opens, the channel
SEL
button LED will light solid on
that channel to show which EQ is being controlled by the encoders.
If that EQ is linked to any other EQs, then the
SEL
buttons on the linked
channels will flash to show they are part of that link.
EQ control
There are 3 rotary controls which relate to the first three encoders from
the left, all of which have fixed stepped values.
u
Change the Cut and Boost by rotating the associated encoders.
u
The preset frequencies of these three controls are selected by pushing
and turning the encoders.
As you do this, a LED will light on screen to indicate your selection.
From left to right these are:
1
st
Encoder
Lo Shelf
OFF
35 Hz
60 Hz
110 Hz 220 Hz
2
nd
Encoder
Mid Band
OFF
0.36
0.7
1.6
3.2
4.8
7.2
3
rd
Encoder
Hi Shelf
OFF
16 kHz
12 kHz
10 kHz
u
The 4
th
encoder on the right can be pressed to select
Hi Q
on the Mid
band frequencies.
When selected, the
HI-Q
graphic on screen reflect this.
When the
EQ
button is selected, it will bring up the last EQ used on
screen.
u
Using the
t
&
u
buttons on the Monitor panel or the channel
SEL
buttons, select the channel you want to control.
The selected path will be displayed.
NB:
You can select EQ a different way by pressing a channel
SEL
button,
which will bring up the EQ for that channel.
u
Turning any of the first three encoders will
Cut
or
Boost
that EQ
parameter.
u
Turning on the
x5
button will speed up the turns of the encoders.
u
Pressing and turning together will change the
Frequency
around
which the EQ is cut or boosted.
This will be shown with a green dot next to the selected frequency.
- 99 -
