u
In a similar way with
FLIP
on you can now use the faders to control and
change the Send Destination, Position and Mute. The fader MUTE button
always acts as the Send Mute parameter when FLIP is on. To apply
Destination changes you still have to press the Ch V-Pot.
u
If you do not press the Ch V-Pot after setting the Send Destination,
regardless of the FLIP mode, any changes you have made will be lost
when you change another parameter or send destination. So always
remember to press the Ch V-Pot after changing the send destination.
We will now change the Genesys console surface layout to control
the Aux Sends in Channel View mode.
u
Make sure the
F5
button is not on i.e.
FLIP
is off. If FLIP is on press
F5
to turn it off.
u
AUX mode first starts up in Mixer View. We need to change the AUX
mode to Channel View. Press AUX button until you see the following text
on the top-most line on the Genesys software:
Send Channel View
...
Channel View
allows you to edit all the Send parameters for a single
DAW track laid out across the Genesys console surface:
Send Destination,
Send Level, Send Position (Pre/Post/Post Pan), Send Mute.
u
Press the
fader
SEL
button for Logic track 1 (or the first assigned DAW
track). You are now controlling Send parameters for track 1. You will see
the top right corner display indicator change to
01
(if not already) to
indicate you have selected track 1. The fader SEL button will also flash.
u
F1
,
F2
or the
fader SEL
buttons are used to select which DAW track
you are controlling.
u
F3
and
F4
buttons are used to shift the the Send
Destination/Level/Position/Mute parameters for each Send slot on the
selected track up/down the console surface.
For example, on an 8 channel Genesys Black console, with the faders 1-8
and 9-16 mapped to the DAW control and with track 1 selected, the
control surface will be laid out across the console in the following manner:
Send 1
Faders (Ch V-Pots) 1-4: Destination, Level, Position, Mute.
Send 2
Faders (Ch V-Pots) 5-8: Destination, Level, Position, Mute.
Send 3
Faders (Ch V-Pots) 9-12: Destination, Level, Position, Mute.
Send 4
Faders (Ch V-Pots) 13-16: Destination, Level, Position, Mute.
u
Press
F4
to shift the send layout to the left. You will see Sends 5, 6, 7
and 8 appearing on the console surface as you keep pressing F4. In this
manner you can control the Send parameters for all other sends on the
selected track.
u
Press
F3
to shift the send layout to the right. You will see Sends 1, 2, 3
and 4 reappearing on the console surface as you keep pressing F3.
u
In a similar way you can change the Send parameters for all other DAW
tracks.
u
FLIP
mode and
Ch V-Pot push-button
functionality in Channel View
mode is exactly the same as detailed in the Mixer View mode above.
- 179 -
