Meter bridge
CHANNEL Meters
Each fader strip meter has 2 scales:
•
VU
scale, displayed to the left
•
dBu
scale, displayed to the right
Beneath this, a bank of 15 leds displays the following information:
MIX
Indicates whether the Monitor path or Channel path is contributing to the
L and R of the Main Mix.
MTR
The MTR LED indicates whether the meter is sourced from the
CH I/P
,
DAW Send
or
DAW Return
.
8T 1
to
8T 8
LEDs
In it's default state, these LEDs indicate which of the 8T busses the
Channel Input is routed to.
u
When the routing is interrogated (by pressing the >8T button at the
bottom of the channel strip) these LEDs will indicate which of the 8T
busses the Monitor Input is routed to whilst the button is pressed.
SIG
The
SIG
(Signal Presence) LED lights depending on the threshold of the
SIG PRES
rotary control on the Master Select panel.
GR
The
GR
(Gain Reduction) LED lights to show any compression that may be
applied to the path.
It is a tri-state LED and will light either:
•
Green (light compression)
•
Orange (medium)
•
Red (heavy)
Gain Reduction can also be displayed on the Genesys display when in the
DYN
setting.
- 91 -
