AES Transmitters
These show what can be sent from the console on the 8 AES transmitters
per card.
u
There are three options available, only one of which can be selected at
a time.
•
Channels Direct Output: Sends the channel Direct Outputs to the
AES
TX
transmitters.
•
DLINE from DAW via FireWire: Sends the DLINE signal from DAW
through FireWire to the
AES TX
transmitters.
This means the AD/DA card to be used as a FireWire to AES converter,
without those signals contributing to the audio busses in the console.
•
DMON from DAW via FireWire: Sends the DMON signal from DAW
through FireWire to the
AES TX
transmitters .
This means the AD/DA card to be used as a FireWire to AES converter,
without those signals contributing to the audio busses in the console.
u
Once set, click
Apply
to reconfigure the FireWire buss with your
selection.
Monitor Section
u
Select the
Monitor
radio button at the top of the screen to show the
Monitor card input and output options.
To DAW via FireWire
u
Select whether you want the
8T
s,
Auxes
,
AES DEXT
or
MIX
/
2T
audio to be sent digitally from the console to your DAW via the FireWire
cable.
These options are not interlocked and all can be selected, dependent on
the total FireWire bandwidth not being exceeded.
•
All of the
Auxes
(both mono and stereo) are selected with a single tick.
•
All of the
8Ts
(1-8) are selected with a single tick.
•
The
MAIN MIX
and
2T MIX
are selected with a single tick.
•
The digital 5.1 Externals that come into the console via the AES
receivers can also be sent to the FireWire.
u
Once set, click
Apply
to reconfigure the FireWire buss with your
selection.
Monitor section D-EXT Input
u
Select where you want the 5.1 surround digital input to be taken from
and fed into the monitoring system, either from the
D-EXT 5.1 from
DAW via FireWire
, or from the
AES D-EXT Receiver 5.1
.
u
Once set, click
Apply
to reconfigure the FireWire buss with your
selection.
On the console surface, the digital externals are selected into the
- 156 -
