Neve GENESYS BLACK, Руководство пользователя

Страница: 67 / 237

RTE Mode on the ROUTE SEL Section
RTE SEL
Works as an On/Off button for this section of the panel, and lights yellow
when engaged.
It switches the screen over to the Routing Screen display (shown below)
This also allows the
•
CH and MON
•
L and R
•
1 to 8
• t
&
u
buttons to be used to route Channels and Revs to the 8T and Mix busses
1 – 8
Lights yellow and acts as On/Off buttons.
These buttons allow the routing of 8Ts within the Channel and Rev
modules.
L & R
Lights yellow and acts as On/Off buttons.
They route the path to the Main Mix buss within the Channel or Rev
modules.
As with the 8Ts (above), scrolling up or down the channel or Rev numbers
will allow you to route to Mix L and Mix R.
NB:
When deselecting L & R from Channel or Monitor, you will need to select
CH or MON (when lit) first, to be able to deselect L and/or R .
CH
This On/Off button lights yellow when pressed, and allows the Channel
path to be routed to Mix L and Mix R in the channel module.
MON
This On/Off button lights yellow when pressed, and allows the Monitor
path to be routed to Mix L and Mix R in the channel module.
CH and MON are interlocked.
t
&
u
keys
When pressed, they are used to scroll up/down the Channels, 8Ts and
Revs so you are able to route them to the 8T and Mix Outputs.
This routing information will be displayed on screen.
•
The Routing system on the Monitor Panel does not form part of the
Store system. Only a route present (or absent) when the store is
created will be recalled.
•
If routes have already been made, then scrolling through the paths will
display those routes where appropriate.
If selecting Rev Returns to be routed to the 8Ts:
•
Rev 1 can only be routed to 8T 1 & 2
•
Rev 2 can only be routed to 8T 3 & 4
•
Rev 3 can only be routed to 8T 5 & 6
•
Rev 4 can only be routed to 8T 7 & 8
Routes can also be created (or removed) by clicking on the relevant
junctions on the Routing Screen display, as shown left.
- 67 -
The above screen can
also be opened directly:
On any Channel strip
hold down the SEL
button, and then press
the adjacent >8T button.
On any 8T strip:
- A single press of the
SEL button will open the
routing screen for even-
numbered 8Ts.
- A double press of the
SEL button will open the
routing screen for odd-
numbered 8Ts.
- Pressing SEL and then
pressing the adjacent
PRE button will open the
screen for the Revs.