u
F1
,
F2
or the
fader SEL
buttons are used to select which DAW track
you are controlling.
u
F3
and
F4
buttons are not used used in this mode.
u
Pans/Surround parameters are assigned to the console surface across
the first block of 8 Genesys DAW assigned faders/Ch V-Pots only. The
remaining (in blocks of 8) Genesys DAW assigned faders/Ch V-Pots mimic
the positions of the first block of faders/Ch V-Pots.
For example, on a 16 channel Genesys console, with the faders 1-8 and 9-
16 mapped to the DAW control, to change the Pans/Surround parameters
for DAW track 16, press the fader SEL button assigned to that track.
Genesys faders/Ch V-Pots 1-8 will now be controlling the Pans/Surround
parameters for DAW track 16. Genesys faders/Ch V-Pots 9-16 will mimic
what is being set/applied to Genesys faders/Ch V-Pots 1-8.
This is different to Channel View mode in AUX mode where the
parameters are laid out across the console surface. Here only the first
block of 8 faders are assigned to controlling the parameters.
u
FLIP
mode and
Ch V-Pot push-button
functionality in Channel View
mode is exactly the same as detailed in the Mixer View mode above.
PLI
u
Press the
PLI
button and it will light up.
PLI
works in two modes.
Mixer View and Channel View. PLI is used to control Logic Pro
Plug-ins
(Inserts)
.
u
Make sure the
F5
button is not on i.e.
FLIP
is off. If FLIP is on press
F5
to turn it off.
u
PLI mode first starts up in Mixer View. Confirm this by looking at the
top-most line on the Genesys software:
Plug-ins / Inserts Mixer View
...
Mixer View
allows view and edit the plug-ins associated with a particular
Insert slot for all DAW tracks, laid out across the Genesys console surface
.
We always use Mixer view to select a plug-in and Channel View to edit it.
The Genesys software (at the top) will indicate the function or mode you
are in along with the current plug-in,
[P1]
,
[P2]
...
[P9]
. DAW control
allows you to control up to 16 Logic plug-ins per track.
u
Press the
fader
SEL
button for Logic track 1 (or the first assigned DAW
track). You have now selected DAW track 1. You will see in the top right
corner the display indicator has changed to
01
(if not already) to indicate
you have selected track 1. The fader SEL button will also flash.
u
F1
and
F2
buttons are used to select which plug-in you are controlling.
Now keep pressing F1 until you are see that you are controlling
Plug-in 1
(plug-in slot 1),
[P1]
will be shown on the Genesys software.
u
F3
and
F4
buttons are used to shift the plug-in parameters up/down
the console surface, the number of parameters depends on how many
controls are associated with a plug-in.
The Genesys software should now show the following information on the
top-most line:
Plug-ins / Inserts Mixer View [P1]
u
On the channel strip using the Ch V-Pot (large red encoder) for the
selected track turn the encoder and a new plug-in will be selected. Turn
the Ch V-Pot anti-clockwise until you see a '
--
' on the Genesys software,
this removes the plug-in. Keep turning the Ch V-Pot clockwise
slowly
one-notch at a time,
and select a plug-in, i.e.
Fat EQ
. This will be shown
on the Genesys software as you change the plug-in selection.
- 181 -
