the total number of audio channels that the FireWire system is capable of
handling at the top of the bar.
This capability is dependent on the sample rate - the higher the sample
rate, the fewer channels there are available.
See page 153 for limitations of the FireWire protocol.
As you tick or untick the selections on screen, then the fuel gauge will
reflect these live changes and display how many paths are still available at
the side of the coloured bar.
As shown left, you are still be able to assign 48 more audio channels to
the FireWire buss, from a total of the 96 available.
If there is no FireWire detected, this bar-graph will be displayed as empty.
AES Receivers Sample Rate Converters
It is possible to convert the sample rate of the AES Receivers incoming
audio to the Genesys system sample rate if these do not match.
For example, if an incoming signal is at 44.1kHz and the system sample
rate is 48kHz, then when the pairs of paths shown left are ticked, these
signals at 44.1kHz will be automatically converted up to 48kHz.
The
DMON
(channel digital monitoring input) and
DLINE
(channel digital
line input) input options displayed left will change depending on which 8-
fader section is selected at the top of the screen. For example, on fader
section 9-16, the options shown will instead be
9/10
,
11/12
,
13/14
&
15/16
etc.
These options are only selectable as pairs.
The
SRC Enable
options are not interlocked and all are selectable.
They are all enabled by default.
u
If desired, untick as appropriate to disable the sample rate converters
for each pair of paths.
To DAW via FireWire
This covers the channels output from the Genesys to the DAW via
FireWire.
u
There are three options available:
•
Channels Direct Output: outputs the eight channel Channel Direct
Outputs to the FireWire.
•
AES Receivers DLINE: Outputs the AES DLINE Receivers to the FireWire.
•
AES Receivers DMON: Outputs the AES DMON Receivers to the FireWire.
At sample rates of 96kHz or lower (
LO
and
MID
bitrates),
two
of these
three options are available at one time.
If no FireWire cable has been detected, all of these options will be
unavailable.
u
Once set, click
Apply
to reconfigure the FireWire buss with your
selection.
- 154 -
