Display the WiFi radio settings
To display the WiFi radio settings of the access point:
1. Launch a web browser from a computer that is connected to the same network as
the access point or directly to the access point through an Ethernet cable or WiFi
connection.
2. Enter the IP address that is assigned to the access point.
A login window displays.
If your browser displays a security warning, you can proceed, or add an exception
for the security warning. For more information, see What to do if you get a browser
security warning on page 44.
3. Enter the access point user name and password.
The user name is admin. The password is the one that you specified. The user name
and password are case-sensitive.
If you previously added the access point to a NETGEAR Insight network location and
managed the access point through the Insight Cloud Portal or Insight app, enter the
Insight network password for that location. For more information, see Connect over
WiFi using the NETGEAR Insight app on page 26.
The Dashboard page displays.
4. Locate the Radio Information pane at the top, right corner of the Dashboard page
(if the page width on your device is sufficient; otherwise, it might be elsewhere).
The following settings are displayed:
•
Radio status (If the 2.4 GHz, 5 GHz, or 6 GHz icon is displayed as gray, the radio
is turned off.)
User Manual
184
Monitor the Access Point and the
Network
Insight Managed WiFi 6E AXE7800 Tri-band Multi-Gig Access Point Model WAX630E
