Apex Classic Setup and Programming Guide v2.2
Page
25
PROBE MODULE 2
AquaController Apex Probe Module 2 (PM2) adds a Temperature and Conductivity
ports to the Apex system. This module connects anywhere on the AquaBus and
includes 2 AquaBus ports for flexible connection options. PM2 also includes 6
digital inputs for connecting float switches, sensors, etc. PM2 temperature and
Conductivity probes are enabled/disabled and calibrated using the same menus
and procedures as the Apex Base Module probes, see the section titled Probe
Setup for more information.
PROBE MODULE 3
AquaController Apex Probe Module 3 (PM3) adds a Temperature and Dissolved
Oxygen ports to the Apex system. This module connects anywhere on the
AquaBus and includes 2 AquaBus ports for flexible connection options. PM3 also
includes 6 digital inputs for connecting float switches, sensors, etc. PM3
temperature and Dissolved Oxygen probes are enabled/disabled and calibrated
using the same menus and procedures as the Apex Base Module probes, see the
section titled Probe Setup for more information.
UPDATING AQUABUS MODULES
See the section titled Updating Firmware for instructions on updating AquaBus
modules.
DELETE AN APEX MODULE
To delete an Apex Module from the system:
Apex Display: Setup – Module Setup – Delete Module – use the up/down
arrows to highlight the Apex module to delete, push Select to delete.
Web Interface: Configuration – Module Setup – in the Module: box in the
Module Configure area, select the Apex module to delete from the
dropdown list, click the Delete Module radio button, click the Submit
Module Update button.
RENAME AN APEX MODULE
To rename an Apex Module from the system:
Apex Display: Setup – Module Setup – Modify Name – use the up/down
arrows to highlight the Apex module to rename, push Select, use the
up/down arrows to change the highlighted digit, use the left/right arrows to
select the highlighted digit, when done, press OK.
Web Interface: Configuration – Module Setup – in the Module Configure
area, in the Module: box, select the Apex module to rename from the
