Apex Classic Setup and Programming Guide v2.2
Page
22
Enable/disable Automatic Clock Set feature
Apex Display: System – Clock Setup – Auto Set: – push the Select button
to toggle this feature on and off.
Web Interface: Configuration – Clock setup – click the Enable or Disable
radio button next to Auto Clock Set.
Manually set the Tank Time
Apex Display: System – Clock Setup – Tank Time Set – use the up/down
arrows to change the highlighted item, use the left/right arrows to select
the item to highlight, when done, press OK.
Web Interface: Configuration – Clock setup – click in the Time zone field
and type the appropriate date and time.
NOTE: When Auto Clock Set is enabled, you are unable to manually change the
date and time.
Time Zone (in GMT offset)
Apex Display: System – Clock Setup – Time zone – use the up/down
arrows to change the appropriate time zone (in GMT offset) for your area,
when done, press OK.
Web Interface: Configuration – Clock setup – click in the Time zone field
and type the appropriate time zone (in GMT offset).
NOTE: Please refer to www.worldtimezone.com for information on the correct
time zone in GMT offset for your area.
Enable/disable automatic Daylight Saving Time adjustments
Apex Display: System – Clock Setup – DST: – push the Select button to
toggle this feature on and off.
Web Interface: Configuration – Clock setup – click the Enable or Disable
radio button next to Daylight Savings Time.
Select to view the time in 12 or 24 hour format
Apex Display: System – Clock Setup – 12/24 Hr: – push the Select button
to toggle between 12 and 24 hour formats.
Web Interface: This option is not available from the Web Interface.
The Leap Seconds allows you to fine tune the accuracy of the AquaController
Apex clock. The number programmed into the AquaController Apex indicates how
