Neoware t5730 - Thin Client, Руководство пользователя

Страница: 99 / 506

Host Connection Settings
SSL Connection Settings 77
encrypted, along with the certificate itself. Please note this is a
security risk as anyone who can acquire a copy of your registry
will be able to use your certificate.
5
Click
OK
once you have configured the certificates.
6
Either click
Next
in the Connection Wizard, or
Connect
in the
New Connection
dialog.
7 Login as usual when the telnet login prompt appears.
Error Messages
Could not connect TCP/IP socket.
The most likely cause of this error is that the service is not running
on the server, or the port number is incorrect.
Could not connect SSL socket. Please check that your client
certificate is correct.
This message is returned if the server refuses the SSL connection.
The most likely causes are that the server is expecting a client certif-
icate but none has been specified or the client certificate specified is
invalid for some reason. This error may also be seen if the server is
running an incompatible version of SSL. TeemTalk currently sup-
ports SSL2, SSL3 and TLS.
The server’s certificate cannot be verified.
The server’s identity certificate was not signed by any of the root
certificates installed in TeemTalk. TeemTalk will not connect to a
host it cannot verify.
Common name does not match host name.
The common name is part of the server’s certificate. SSL assumes
this will match the host name given in the
Host Name
box in the
Connection Wizard, or
Connect To
box in the
New Connection
dialog. If they do not match TeemTalk will not connect to the host.
Notes About
Certificates
The SSL Protocol uses three types of certificate:
1 Server certificates. These are always sent by the server to the
client to validate the server’s identity. SSL handles them
internally and they are never saved on the client.