Neoware t5730 - Thin Client, Руководство пользователя

Страница: 197 / 506

Setup Menus
IBM 3270 Settings 175
The
Start Seq
box enables you to enter the character or sequence of
characters that initiate a print bypass.
The end sequence that terminates the print bypass can be specified
either by entering the actual characters in the
End Seq
box when
Specify End Sequence
is checked, or by specifying the number of
characters that make up the end sequence in the
End Length
box
when
End on Non-Hex
is checked.
If no
End Seq
is entered, the bypass is assumed to be for a single pair
of characters only. If an
End Seq
is specified, characters in the data
stream between the start and end are interpreted as encoded ASCII.
For example, “1B0A” becomes ASCII 27 10 (ESC LF).
Selecting
End on Non-Hex
enables you to specify the number of
characters that make up the end sequence in the
End Length
box.
The bypass will then terminate as soon as a non-hexadecimal char-
acter is received (any character except in the range 0 through 9 and
A through F) followed by the end sequence.
Characters can be entered in several ways. For example, to specify
the ASCII escape character, you can enter either
_027 , \u001B , \e ,
\033 , or even ^[ .
The General Tab