Neoware t5730 - Thin Client, Руководство пользователя

Страница: 144 / 506

Setup Menus
122 The File Menu
highlighted. Clicking on a defined session then the
OK
button will
cause TeemTalk to load that session configuration.
The session configuration that TeemTalk will load by default on
startup is indicated by a letter
D
next to its name. You can change the
default selection by selecting the required session description then
clicking the
Save As Default
button.
Session templates created by the system administrator are indicated
by the letter
T
after the session name. Refer to the section “Session
Management” on page 17 for details.
You can delete any session configurations except templates by
selecting the description then clicking the
Delete
button. Note that if
the session deleted was a copy of a template (which will have the
same name), the template version will reappear in the
Defined Ses-
sions
list, as indicated by the letter
T
.
Close Session
This will close the current session.
Save Session
Selecting this option will save the current session configuration.
If you were using a session template and modified the settings, a
local copy of the template will be made
with the same name , but
with the changed settings. This copy will replace the template in the
list of session configurations displayed in the
Open Session
dialog.
Note that the
T
template indicator will no longer be displayed.
Save Session As...
This option is only available if TeemTalk was started without a ses-
sion (i.e. not started by clicking on a desktop icon or by selecting a
session from the
Start
menu). It will display a dialog that enables
you to save the current session configuration under a new name.