Neoware t5730 - Thin Client, Руководство пользователя

Страница: 186 / 506

Setup Menus
164 Wyse Settings
Page Size
Factory default: 1 x Lines
This option applies to the WY-50+ and WY-60 emulations and spec-
ifies the size of a page in display memory in multiples of the
Lines
setting. Note that the other emulations only support
1 x Lines
.
The
1 + Rest
setting will divide the display memory into two pages,
the first containing the number of lines specified by the
Lines
option,
the second containing all the remaining lines.
Note that changing the page format will cause the entire display
memory to be cleared, the cursor will move to the home position and
the scroll margin will be reset.
Status Line
Factory default: Standard
This option applies to all emulations and enables you to specify the
type of status line displayed at the top of the screen, or remove it
from the display.
Both the
Standard
and
Extended
status lines display messages about
the state of the emulation or application. The
Extended
status line
displays additional editing status messages. Refer to the section
“Status Line Messages” on page 382 for details.
Multiple Page
Factory default: Checked
This option applies to the WY-50+, WY-60 and all the TVI
emulations. It determines whether or not more than one page of
display memory can be accessed. When checked, all pages will be
accessible. See also the
Auto Page
option.
Note that the TVI emulations support two pages of 24 lines each
when this and the
Auto Page
options are checked, regardless of the
Lines
and
Page Size
settings.