Neoware t5730 - Thin Client, Руководство пользователя

Страница: 311 / 506

HP 700-92/96 Emulation
Function Keys & Buttons 289
Note: This function does not take effect when the emulation is in
Local mode. In Remote mode, received data is sent directly to the
selected device(s).
The keyboard will be disabled when Record mode is activated
except for the
F2 key which is used to exit the mode.
Log Bottom - F3
When the cursor moves to the next line as a result of an explicit line
feed or end-of-line wraparound, the line of data which the cursor has
just moved from will be sent to the printer when this function is acti-
vated. This enables you to create a hardcopy of all the lines in the
order in which they were entered via the keyboard or received from
the host.
Note: The terminal emulation and the host must both be using the
ENQ/ACK or Xon/Xoff handshakes, or a baud rate that is no higher
than the rate supported by the printer.
Log Bottom
remains activated until either this button or F3 is
pressed again,
Log Top
is activated, a reset is performed, or the
emulation is exited.
Log Top - F4
When the display memory becomes full and more data is received
from the host or keyboard, lines of data from the top of the display
are deleted to make way for the new data. The
Log Top
function
enables the data that is removed from the top of the display to be
sent to the printer when the
To Ext Dev
function is activated in the
Device Control
menu.
Note: The terminal emulation and the host must both be using the
ENQ/ACK or Xon/Xoff handshakes, or a baud rate that is no higher
than the rate supported by the printer.
Log Top
remains activated until either this button or F4 is pressed
again,
Log Bottom
is activated, a reset is performed, or the emula-
tion is exited.