Neoware t5730 - Thin Client, Руководство пользователя

Страница: 256 / 506

Setup Menus
234 Tek 4014 Settings
the last column of the bottom line of the first margin. Text will then
fill the right half of the window.
Destructive Backspace
Factory default: Unchecked
The setting of this option determines whether the graphics text char-
acter preceding the current cursor position will be deleted or not
when the
Backspace key is pressed.
Screen Mapping
Factory default: 1024 (x) by 768 (y)
This option enables you to select the correct resolution for screen
addressing when in Tek 4014 or Westward 2119 graphics modes.
For
Tek 4014
mode select
1024 (x) by 768 (y)
resolution (default).
For
Westward 2119
mode select
1024 (x) by 784 (y)
resolution.
Gin Terminators
Factory default: ^M^D (i.e. CR EOT)
This option enables you to specify the termination character(s) that
follow a GIN address transmission. A maximum of 6 characters can
be entered.
To change the current definition, delete the definition displayed in
the text box and type in the new one, either as the control key char-
acter equivalent or the decimal value of the ASCII character(s).
For example, the ASCII character CR can be entered by typing the
characters ^ and M , representing the keys Ctrl + M which, when
pressed together would generate the CR code.
Decimal values are entered as three-digit numbers immediately pre-
ceded by an underscore character. Values with only two digits must
be preceded by a zero. For example, the decimal value of
CR is 13,
so this would be entered as _013 .