Neoware t5730 - Thin Client, Руководство пользователя

Страница: 485 / 506

Virtual Key Names
TeemTalk Virtual Key Name Functions 463
TeemTalk Virtual Key Name Functions
TeemTalk provides additional virtual key name functions for special
tasks such as sending text to a file or device, and reading text from a
file or device to place in the keyboard buffer as if typed.
Sending Text to a
File or Device
The following command enables you to send text to a file or device
(e.g. COM1):
<VK_FILE_O><name>data string<VK_FEND>
where
name
is either the name of the file or the name of the device
to be written to.
The
data string
can include control codes in
_xxx
format, for
example
_013
for carriage return.
If a filename is specified that already exists, it will be replaced. For
example,
<VK_FILE_O><c:\file.txt>text to enter to
file_013_010next line of file<VK_FEND>
will create a file called file.txt containing the following two lines of
text:
text to enter to file
next line of file
If a COM device is specified, the port settings (baud rate, parity,
etc.) will be made as the AUX port. Additionally the name can
include serial device settings, which must have the same format as
the relevant command line options. For example, the following spec-
ifies a baud rate of 1200, no parity, 8 data bits and 1 stop bit:
<VK_FILE_O><COM1: baud=1200 parity=N data=8 stop=1>
The following command specifies a baud rate of 9600, odd parity, 7
data bits and 1 stop bit:
<VK_FILE_O><com1:96,o,7,1>