Neoware t5730 - Thin Client, Руководство пользователя

Страница: 66 / 506

TeemTalk Connection Wizard Settings
44 Printer Port Settings
(Note that the
PassThrough
option will be unselectable if the printer
driver currently selected does not support this facility.)
If you find a through print results in data being split into lines, each
treated as a separate print job, specify a time in the
Seconds Close
Delay
box (e.g. 5 seconds). This will enable the next line of data to
be sent before the print job is assumed to have finished and therefore
prevents the print job from being closed prematurely. When set to
0 ,
TeemTalk will not start printing until it receives a ‘print end of job’
command from the host. Entering any other number will cause
TeemTalk to print after the specified number of seconds have
elapsed, regardless of whether the ‘print end of job’ command has
been received from the host. If you require the port to be kept open
all the time (to stop the printer resetting) enter
-1 (minus one).
Direct Print Data to
a Specific Port
(Print through actions only, e.g. IBM 3270 or IBM 5250 host print-
ing.)
To direct print data to a specific port, select
Print Direct To Port
and
select the port in the list box.
Selecting
Auto Line Feed
will cause the printer to print at the begin-
ning of the next line when a carriage return command is received.
If you find a through print results in data being split into lines, each
treated as a separate print job, specify a time in the
seconds Close
Delay
box (e.g. 5 seconds). This will enable the next line of data to
be sent before the print job is assumed to have finished and therefore
prevents the print job from being closed prematurely. When set to
0 ,
TeemTalk will not start printing until it receives a ‘print end of job’
command from the host. Entering any other number will cause
TeemTalk to print after the specified number of seconds have
elapsed, regardless of whether the ‘print end of job’ command has
been received from the host. If you require the port to be kept open
all the time (to stop the printer resetting) enter
-1 (minus one).
Selecting the
FormFeed Terminator
option will cause the printer to
advance the paper to the top of the form when it has finished print-
ing.