Neoware t5730 - Thin Client, Руководство пользователя

Страница: 37 / 506

Getting Started
The TeemTalk Window Display 15
Refer to the section “Soft Buttons” on page 244 for information on
programming the buttons.
The Status Bar
Along the bottom of the TeemTalk window is a status bar that shows
the status of various operations and enables you to switch between
modes. The information displayed in the status bar depends on the
current terminal emulation.
The following description applies when running any of the DEC VT
terminal emulations, though some of the fields and buttons will be
applicable to other emulations as well.
1 2 3 4 5 6 7 8 9 10 11
Item 1 : This displays two LEDs. The first LED indicates whether
or not you are connected to the host. It will show red when
not connected and green when you are connected. The sec-
ond LED indicates whether or not data is being sent to or
from the host. It will show dull green when there is no
activity, red when data is being sent to the host, and bright
green when data is being received from the host.
Item 2 : This button enables you to switch between
Local
and
Online
mode. The label indicates the mode you will switch
to if the button is clicked.
Item 3 : This button enables you to
Pause
or
Resume
scrolling data
in the window. The label indicates the action that will be
taken if the button is clicked.
Item 4 : Indicates the current terminal emulation.
Item 5 : This displays the active session (always 1), the current
page number (always 1), and the
line,column location of
the text cursor.
Item 6 : This indicates whether
Overstrike Mode
or
Insert Mode
is
currently selected. In
Overstrike Mode
(default), new char-
acters will replace already existing characters at the cursor
position. When
Insert Mode
is selected, new characters