Neoware t5730 - Thin Client, Руководство пользователя

Страница: 142 / 506

Setup Menus
120 The File Menu
New Connection...
Factory default: Serial, Com 1
This will display a dialog that enables you to configure TeemTalk to
make a host connection.
The
Type
list box enables you to specify the type of host connection
to be made. You can select from the following:
TCP/IP
Enables a TCP/IP host connection. Refer to the section
“TCP/IP Connection Settings” on page 57 for details.
Modem
Enables a host connection via a modem. Refer to the sec-
tion “Modem Connection Settings” on page 70 for details.
Serial
Enables a host connection via a serial port. Refer to the
section “Serial Connection Settings” on page 72 for
details.
SSL
Enables a host connection using the Secure Sockets Layer
protocol. Refer to the section “SSL Connection Settings”
on page 75 for details.
SSH
Enables a host connection using the Secure Shell protocol.
Refer to the section “SSH Connection Settings” on
page 80 for details.
None
No host connection settings.
The
Connect To
box specifies the port or host to communicate with.
You can either make a selection from the list or enter a valid host
name or internet address.