NEC S1400 NF1400-SR40E, Руководство пользователя

Страница: 20 / 161

1-3
1.3 Installation and Connection of Disk Array Unit
WARNING
 Do not use the disk array unit in an area with much moisture or water
usage. If so, a fault, electrical shock, or fire may occur.
 Do not use the disk array unit in an area where inflammable gas and/or
combustible substance are placed. If so, fire or explosion may occur.
 Do not install the disk array unit in an area of much moisture or dust.
Remove dust adhering to AC outlets and the plugs of power cords, if any. If
dust remains adhering to an AC outlet and/or plug, fire may occur.
 Do not concentrate power cords only to some AC outlets. If so, fire may
occur.
 Do not put a heavy substance on a power cord. If so, the coating of the
power cord may be broken, fire may occur, and/or you may be electrically
shocked.
 Do not connect the plug of a power cord to an AC outlet with a wet hand. If
so, you may be electrically shocked.
CAUTION
 Make sure to disconnect all power cords and cables before relocating the
disk array unit. If not, a malfunction of the system, an electric shock and/or
fire may occur.

While the disk array unit can accept the power of 100 - 240 VAC (50/60 Hz),
the power cord coming with the disk array unit can only accept 100 – 120
VAC. Use 100 – 120 VAC (50/60 Hz) when the attached power cord is
used. Using power of different voltage may cause electric shock, smoke,
and/or fire to occur.
 Do not install the disk array unit and the power cords in an area with direct
sunshine or near an apparatus generating heat such as a heater. If so, a
fault may occur. Further, the coating of the power cord may be melted to
cause fire or electric shock to occur.
 The disk array unit weighs 34 kg or more. Hold the disk array unit and disk
enclosure firmly with at least three people to carry it. Carrying the devices
only by two or less people may strain their back.

Select the place where the disk array unit can be connected to the AC outlet
by using the attached power cord.
 Insert the plug of a power cord into an AC outlet securely. If some clearance
remains between the plug of the power cord and the AC outlet, dust may
enter into the clearance. This then may cause fire to occur.
 Provide sufficient margins for the cables connected to the disk array unit so
that legs may not be trapped by the cables. Avoid power plugs and FC
connectors from suffering excess forces.
 Do not use cables connected to the disk array unit with them leaving bent. If
so, a fault or fire may occur.