NEC S1400 NF1400-SR40E, Руководство пользователя

Страница: 115 / 161

A-5
9.
Setting of OS Type
The OS type must be set for each port connected to the host when the Port Mode is used or when the
Access Control is not used.
If the host containing several kinds of operating systems is connected to one port, you may specify one
of them. However, if the host using Solaris or AIX is contained, specify it in preference to other
operating systems.
If the host using both Solaris and AIX is contained, specify either one operating system.
The OS type can be set with the "Configuration Setting" of the management software (WebSAM NEC
Storage Manager).
In the WWn mode, use "LD Set Type" of the WebSAM NEC Storage Manager to specify the OS.
10.
Program Product
To use the disk array unit, the following program product is required:
 For S1400:
SystemGlobe NEC Storage BaseProduct Ver3.3 (or later) - NEC Storage S1400
To use the disk array unit, release the license lock using the license code that is provided with
"SystemGlobe NEC Storage BaseProduct Ver3.3 - NEC Storage S1400 ".
A maintenance person is responsible for releasing the license lock of "SystemGlobe NEC Storage
BaseProduct Ver3.3 -NEC StorageS1400 " during the installation of the disk array unit. Please give the
person the license code provided with the product.
Before the disk array unit can be used, the license lock must be released by using the
license code provided with NEC Storage BaseProduct.
Be sure to release the license lock. A disk array unit with the license lock being locked
cannot receive any maintenance services because the operation cannot be
guaranteed.
For any other program product available for the disk array unit, ask your sales representative.