NEC N8800-162F, Руководство пользователя

Страница: 172 / 280

5-36 Installing and Using Utilities
Maintenance of NEC Express5800/ft series
NEC Express5800/ft series maintenance can be done in two ways; one is to use NEC ESMPRO
Manager for remote maintenance and the other is to use the NEC ESMPRO Agent ft server utility
on the NEC Express5800/ft series for local maintenance.
TIPS:
To start the NEC ESMPRO Agent ft server utility installed in the NEC Express5800/ft
series, select the items as follows:
# /opt/nec/esmpro_sa/bin/ESMftcutil
The maintenance functions that can be executed from NEC ESMPRO include three types, those
common to all components, those specific to particular components, and general system settings.
The maintenance functions common to all components are operated in the same way basically (the
operation procedure and typical examples of screen images are described below).
The table below lists the availability of maintenance functions common to all components.
Start Stop
MTBF
clear
Diag-
nosis
F/W
update
Component
R L R L R L R L R L
CPU module
√ √ √ √ √ √
– –
√ √
PCI module
√ √ √ √ √ √
– – – –
PCI slot – – – – – – – – – –
Ethernet adapter – – – – – – – – – –
SCSI adapter – – – – – – – – – –
SCSI enclosure – – – – – – – – – –
SCSI electronics – – – – – – – – – –
SCSI slot – – – – – – – – – –
R: Remote. Executable from remote management PC by using NEC ESMPRO Manager
L: Local. Executable on local server by using ft server utility
√
: Supported
–: Not supported
Note: The MTBF clear of SCSI adapter and Ethernet cannot be performed to built-in devices.