NEC N8800-162F, Руководство пользователя

Страница: 82 / 280

3-14 Linux Setup and Operation
4.
Restart the PCI module.
From the ft server utility, click [Start] of [PCI Module Start/Stop] to the PCI module
which was stopped in the step 3, and the PCI module will be started. Once the PCI
module is started, PCI module diagnosis, mirror volume duplication and PCI module
duplication are performed.
The PCI modules’ status LEDs changes as shown below:
[Indications of the status LEDs]
Immediately after the PCI module startup until the completion of diagnosis:
LED Secondary Primary
1 PRIMARY LED - Green
2 DISK ACCESS LED - Amber or Green
blinking (Green
when accessing to
HDD)
LED System
3 System FT LED -
When duplication of disks is started after the completion of PCI module diagnosis:
*
The status of LEDs varies depending on the method of disk duplication.
LED Secondary Primary
1 PRIMARY LED - Green
2 DISK ACCESS LED Amber or Green
blinking (Green
when accessing to
HDD)
Amber or Green
blinking (Green
when accessing to
HDD)
LED System
3 System FT LED -
After the completion of disk duplication and when the PCI modules are duplicated:
LED Secondary Primary
1 PPRIMARY LED - Green
2 DISK ACCESS LED Green blinking Green blinking
LED System
3 System FT LED Green