NEC N8800-162F, Руководство пользователя

Страница: 81 / 280

Linux Setup and Operation 3-13
3.
Stop the operation of a PCI module using the ft server utility.
Move to the directory where the NEC ESMPRO Agent is installed.
# cd /opt/nec/esmpro_sa/bin
Start the ft server utility.
# ./ESMftcutil
The screen of the ft server utility will appear.
Select [ftServer] - [PCI Module] - [PCI Module (to be removed)]. The screen of the PCI
Module(to be removed) will appear.
Select [PCI Module Start/Stop] - [Stop] to the stop of the PCI .Module.
* As for the primary PCI module (*), if the PCI module 0 is primary, select [PCI
Module(ID:10)]. If the PCI module 1 is primary, select [PCI Module (ID:11)].
When you stop the operation of the primary PCI module, a failover occurs and the
secondary PCI module becomes the primary module.
ft server utility PCI Module
The following events or changes occur when stopping the primary PCI module and the
module fails over:
The screen temporarily blacks out and then displayed again.
Indications of PCI modules’ status LEDs change as follows:
[Indications of the status LEDs]
LED Secondary Primary
1 PRIMARY LED - Green
2 DISK ACCESS LED - Amber or Green
blinking (Green
when accessing to
HDD)
LED System
3 System FT LED -