NEC N8100-1223F, Руководство пользователя

Страница: 416 / 482

9-54 Upgrading Your Server
1.
See the section "Preparing for Installation and Removal" described earlier to prepare.
2.
Unlock the front door with the security key, and open the front door.
3.
Remove the memory slot cover, and remove the memory board on which the DIMMs are
to be installed.
See "Memory Board" described earlier in this chapter.
NOTE:
To additionally install a memory board, remove one screw to
remove the blank cover from the additional slot.
IMPORTANT:
Keep the removed blank cover for future use.
4.
Locate the DIMM socket in which you are going to install DIMMs.
5.
Fully open the levers at both ends of the socket (1) and remove the socket cover.
IMPORTANT:
„
To avoid damaging the lever, do not apply an excess force to the
lever.
„
Keep the removed blank cover for future use.