NEC N8100-1223F, Руководство пользователя

Страница: 214 / 482

4-126 Configuring Your Server
No Error Message What to do
7 Failed to establish the RMCP+
session. Check the network environment.
If there is no network problem, contact your service
representative.
8 The RMCP+ transmission failed. Check the network environment.
If there is no network problem, contact your service
representative.
9 The specified RMCP+ protocol
cannot be used. Check the network environment.
If there is no network problem, contact your service
representative.
10 BMC resources to establish a new
RMCP+ session are insufficient. Try again after a connection from other client is
finished.
11
The RMCP+ session time-out
occurred. Check the network environment and server.
If you don’t find problem, contact your service
representative.
BMC-related errors
No Error Message What to do
1 The IPMI request was aborted. The network may be busy. Try again. If the error
persists, contact your service representative
because a failure may have occurred in BMC.
2
Received bad response from
BMC. Check the server. A failure may have occurred in
BMC.
If you don’t find problem, contact your service
representative.
3 BMC does not support IPMI 2.0
functions. Contact your service representative.
4 Failed to run the IPMI command. Check the server. A failure may have occurred in
BMC.
If you don’t find problem, contact your service
representative.
5 Failed to send the IPMI message. Check the network environment.
If the network has no problem, contact your service
representative.
6 Illegal IPMI message was
requested. Contact your service representative.
7 Specified target is not present. Check the server. A failure may have occurred in
BMC.
If you don’t find problem, contact your service
representative.