NEC N8100-1223F, Руководство пользователя

Страница: 240 / 482

5-20 Installing the Operating System with Express Setup
Installing Disk Array Controller Driver (N8103-81F)
To additionally install the N8103-81F in a system containing Windows Server 2003, connect the
controller and take the following steps to install the driver:
1.
Start [Device Manager] from [Start] menu
→
[Control Panel]
→
[Administrative Tools]
→
[Computer Management].
2.
Double-click [LSI Logic Megaraid SCSI 320-2] which Device Manager lists.
3.
Click the [Driver] tab and click [Update Driver...].
4.
When the "Update Device Driver Wizard" appears, select "Install from a list or specific
location [Advanced]" and click [Next].
5.
Select the "Search for the best driver in these locations." and check the "Search removable
media [floppy, CD-ROM...]" check box.
6.
Insert "Windows Server 2003 OEM-DISK for NEC EXPRESSBUILDER" into the floppy
disk drive, and click [Next].
7.
Copying of the driver is completed, and the [Completing the Hardware Update Wizard]
dialog box below appears. Click [Finish].
Graphics Accelerator Driver
Standard graphics accelerator drivers that are mounted will be installed automatically. The
following is the procedure when it is necessary to install manually.
If you want to utilize optional Graphics Accelerator Driver board, follow the document attached to
the board to install the driver.
1.
Insert the NEC EXPRESSBUILDER CD-ROM into the DVD-ROM drive.
2.
Click Start menu, point to [Programs], [Accessories] and click [Windows Explorer].
3.
Run "SETUP.EXE" in the following directory.
<DVD-ROM Drive Letter>:\WINNT\DOTNET\VIDEO\SETUP.EXE.
4.
Follow the message to continue the installation.
If the dialog message "Digital Signature could not been found." appears, select [Yes] to
continue.
5.
Remove the NEC EXPRESSBUILDER CD-ROM from the DVD-ROM drive, follow the
direction on the screen and restart the system.