NEC N8100-1223F, Руководство пользователя

Страница: 310 / 482

8-16 Troubleshooting
LAN Connector Lamps
LAN1 and LAN2 connectors on the rear panel have two lamps as follows.
„
LINK/ACT lamp
The link/ACT lamp indicates the state of each network port normally equipped with the
server. If the power is supplied to the server and the hub and they are correctly
connected with each other, the lamp is lit green (LINK state). If information is
transmitted through a network port, the lamp blinks green (ACT state).
If the lamp is not lit in the LINK state, check the network cable and the cable connection.
If the lamp is not lit still after the checking, the network (LAN) controller may be defected.
Contact your service representative.
„
1000/100/10 lamps
The 1000/100/10 lamp indicates whether the LAN2 port normally equipped with the
server is operated through the 1000BASE-T, 100BASE-TX or 10BASE-T network
interface. If the lamp is lit amber, the network port is operated through 1000BASE-T.
If the lamp is lit green, the network port is operated through 100BASE-TX. If the lamp is
off, the network port is operated through 10BASE-T.
LINK/ACT lamp
1000/100/10 lamp
LAN port 2
LAN port 1
1000/100/10 lamp